– 20 –
ENGLISH
Adjustment value according to the paper you are using
Note
1) The standard model is set to level 1
prior to being shipped from the fac-
tory.
2) The C dimension and the remained
paper length are the calculated val-
ues. There may be some variations
in actual mechanism.
3) As looseness will occur with the
paper, leading to an increase in dis-
crepancies between the C dimen-
sions and remaining paper length,
when the paper being used has a
printer thickness of 85
µ
m, it is rec-
ommended that Level 2 is used.
When using the paper roll with a core whose inside diameter (A):ø12, outside diameter
(B):ø18
Level 1 Level 2 Level 1 Level 2
ø23
ø29
2.7 7.3
ø21 1.2 5.5
Paper thick-
ness (
µ
m)
65
85
Remained paper length
(Approx. m)
Detected diameter (C)
(Approx. mm)
C
C
B
A
Roll paper core
To Next Page
Loading...
