– 5 –
ENGLISH
Depending on the type and thickness of the paper, it may be necessary to change
the settings for printing darkness. To change the darkness settings, use the
printing darkness settings command <ESC><RS> ‘d’ n. Refer to the separate
programmer’s manual for details.
(3) AC adapter (option)
Model name: PS60
Input: 100 to 240 V AC, 50/60 Hz
Output: DC24±5%, 2.0 A (5.0 A Load 10 sec. Max.)
Important!
Access the following URL for the information of the recommended
paper. http://www.star-m.jp/eng/dl/dl02.htm
To Next Page
Loading...
