-
19
-
4-2. Attaching the Rubber Feet
(1) Ensure that any soiling has been completely wiped o before attaching the rubber feet.
(2) Attach the four rubber feet in the positions shown in the gure.
4-3. Switch Cover Installation
It is not necessary to install the switch cover. Only install it if it is necessary for you. By installing the switch cover, the
following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch cover as shown in the diagram below.
e power switch can be turned ON (
|
) and OFF (O) by inserting a narrow instrument (ball pen etc.) in the holes in
the switch cover.
To Next Page
Loading...
