Star Micronics TSP700 Series - Page 3

2 Pass the fastener through the ferrite core.
3 Loop the fastener around the cable and lock it. Use scissors to cut off any excess.
5. Connecting the Peripheral Drive Cable
Note that the peripheral drive cable is not provided. Please use a cable that meets specifications, see the
separate user’s manual.
Connect the peripheral drive cable to the connector on the printer. Then, connect the other end of the cable
to your peripheral unit.
6. Installing the Printer Driver and the LPR Port Driver Set
To use the wireless LAN interface from Microsoft’s Windows 95/98 and ME, the“Star LPR Port Driver Set” along with
the printer driver is necessary.
Download the Printer Driver and the Star LPR Port Driver Set from thefollowing Web site.
Printer Driver URL :
http://www.star-m.jp/eng/dl/dl02.htm
* To use Windows NT 4.0/2000/XP, the “Star LPR Port Driver Set” is unnecessary.
For EU
Except for EU
10cm
(
Maximum
)
Fastener
EU only
EU only