– 7 –
1-3. How to Release the Cutter Lock
Use the following procedures to release the auto-cutter lock if trouble occurs, such as when paper becomes chewed.
Procedure 1. Turn the apparatus power off.
2. Rotate the emergency knobs in the direction of the arrows on the top of the auto-cutter unit case to return
the cutter blades to their home position.
The emergency knob should be rotated using a tweezers, screwdriver or ball-point pen to prevent
accidents.
Lock lever
Knob
Release lever
Fig. 2-1 Handling Paper Jams
To Next Page
Loading...
