9 | P a g e
Click the “Refresh” button on the discovery tool and launch the Reader Control Tool by double clicking
on the found reader.
If the auto reader discovery tool failed to find the reader, check the leases information from the DHCP
server to find the reader’s IP. The MAC address is written on a label next to the RJ45 Ethernet port.
Connect to the reader manually using the Settings menu tab and select "Set IP Address" in the Reader
Control Tool.
Reader IP-Address Setup
1. Select “Settings->Set IP-Address” from the top menu bar.
2. Type a IPv4 dotted decimal address to the input field.
3. Click on “OK.”
To Next Page
Loading...