Procyon Reader User Manual
Last modified: 02/09/2015
module.isoc.filter.1.length
This variable controls the length of the mask used in ISOC filter #1.
Please note that this variable is specified in bits.
module.isoc.filter.1.mask
This variable controls the mask value used in ISOC filter #1. Please
note that the mask is defined in hexadecimal and the length of the mask
must match the "length" variable for the filter.
module.isoc.filter.1.mem_bank
This variable specifies the memory bank used by ISOC filter #1.
module.isoc.filter.1.offset
This variable specifies the offset used by ISOC filter #1. Please note
that the offset value will be from the beginning of the memory bank
specified in the "mem_bank" variable for this filter. The offset value is
specified in bits.