8 Printer Setup
Important!
Make sure that the printer is unplugged from the AC outlet and that the
computer is switched off before connecting them.
❏ Plug one end of the parallel cable into the parallel port of your computer.
The parallel port should be labelled “Printer,” “Parallel,” “PRN,” “LPT1,”
or something similar.
❏ Plug the other end of the parallel cable into the socket on the side of the
printer and secure it in place with the clips.
Note:
Consult with your dealer for details on how to set up your computer when
using the optional SPC-8K Serial-To-Parallel Interface Converter.
To Next Page
Loading...
