About this manual
This manual describes how to set up, use, and care for the Star LC-90 and NX-
1010 monochrome printers. All of the operations contained in this manual apply
to all of these models, except where specifically noted otherwise.
The following is a list of what you can expect to find in each chapter.
Chapter 1 Choosing a place for your printer, unpacking and setup,
ribbon cassette installation, loading paper, connecting to
your printer
Chapter 2 Installing and starting up, and using User Setup Utility
Chapter 3 How to set up for printing with Microsoft Windows 3.1,
how to prepare for printing, how to print a document, how
to install TrueType fonts, how to select fonts from within
an application
Chapter 4 How to use the control panel
Chapter 5 Selecting the best type of paper, adjusting for paper
thickness, manual sheet feeding, clearing paper jams
Chapter 6 How to set up for printing with MS-DOS, how to select
fonts from within an application
Chapter 7 How to pause printing, paper feed operations, form feeding
Appendix A How to deal with printing problems
Appendix B Speciļ¬cations
Appendix C Interface information
Appendix D Character sets
Appendix E Printer control codes
Appendix F Glossary
To Next Page
Loading...
