Using the Paper window 25
Top Margin
❏ Select the spacing from the top of the paper to the first line of printing.
Paper Out
❏ Switch the paper out detect function on (Enabled) or off (Disabled).
When paper out detection is enabled, the printer automatically stops printing
whenever it senses there is no more paper. When disabled, the printer continues
printing as long as there is data. Disabling this function makes it possible to print
right up to the bottom of a page, but it also creates the danger or printing when
there is no paper loaded in the printer, which can damage the print head and
platen.
Tear Off
❏ Switch the tear-off function on (Enabled) or off (Disabled).
This function controls a feature of the optional PT-10Y Push Tractor Unit.
For details on this feature, see the Users Manual that comes with the Push
Tractor Unit.
Timeout Printing
❏ Switch time-out printing on (Enabled) or off (Disabled).
When time-out printing is enabled and paper is loaded in the Auto Sheet Feeder,
the printer waits for 30 seconds after printing. If no further data is received
within 30 seconds, the printer ejects the current page. The page is not ejected
automatically when time-out printing is disabled.
To Next Page
Loading...
Need help?
General