Star SM-S220I SERIES - Page 19

- 12 -
After you have congured all of the settings, press and release FEED and MODE at the same time. The
new settings will be printed.
If the settings were not congured correctly, follow the above procedure to congure the settings again.
8. Press FEED once to switch the displayed setting from the black mark sensor mode to the
black mark sensor sensitivity.
The current black mark sensor sensitinity will appear on the display.
5
Press MODE twice to set the black mark sensor sensitivity to medium2.
SENSOR LOW
g
SENSOR MIDIUM1
g
SENSOR MIDIUM2
9. Press FEED once to switch the displayed setting from the black mark sensor sensitivity to the
power down.
The current power down will appear on the display.
6
Press MODE once to set the power down to 1 minute sleep.
PWDN NO USE
g
PWDN 1 min.