Caution Symbol
This symbol is placed near the thermal head to indicate that it may be hot.
Never touch the thermal head immediately after the printer has been used. Let the thermal
head cool for a few minutes before touching it.
This symbol is placed near the thermal head to indicate that it is easily damaged. Observe
the precautions for handling electrostatic sensitive devices.
Safety Precautions
Please be sure to read
To use this product in safety, please follow the precautions given below.
WARNING
P
If you notice smoke, a strange smell, or a strange sound, turn o the power immediately, and re-
move the battery pack and battery charger. en contact a Star Micronics dealer.
P
If any foreign material (metal scraps, water, or other uid) enters the printer, immediately turn o
the printer and remove the battery charger and/or battery pack. en, contact your dealer for ad-
vice. Continued use of the printer could result in a re.
P
Never attempt to repair the printer yourself. Also do not disassemble or modify the product.
Doing so could lead to injury, re, or electric shock.
P
Do not touch the tear bar.
- ere is a tear bar inside the paper outlet slot. Not only should you not put your hand in the paper
outlet slot while printing is in progress, never put your hand into the outlet even when printing is
not in progress.
- e printer cover can be opened when replacing the paper. However, since the tear bar is on the
inside of the printer cover, be careful not to place your face or hands too close to the tear bar.
P
During and immediately aer printing, the area around the thermal head is very hot.
Do not touch it, as you could be burned.
P
If any battery uid gets on your skin or clothing, immediately wash the aected area with fresh wa-
ter. Otherwise, skin damage may result.
P
e battery pack may be hot immediately aer the product has been used.
To Next Page
Loading...
Need help?
General
