Star SP298 SERIES - Download, Peripheral, and Slip Control

22
ENGLISH
Download Graphics Printing
Peripheral Device Control
Slip Control
Control Codes
Hexadecimal
Codes
Function
<ESC> “&” <0> n1 n2 .. 1B 26 00 n1 n2 .. Defines download characters
<ESC> “%” “1”
<ESC> “%” <1>
1B 25 31
1B 25 01
Enables download character set
<ESC> “%” “0”
<ESC> “%” <0>
1B 25 30
1B 25 00
Disables download character set
Control Codes
Hexadecimal
Codes
Function
<ESC> <BEL> n1 n2 1B 07 n1 n2 Define drive pulse width for peripheral device #1
<BEL> 07 Control peripheral device #1
<FS> 1C Control peripheral device #1 immediately
<EM> 19 Control peripheral device #2 immediately
<SUB> 1A Control peripheral device #2 immediately
Control Codes
Hexadecimal
Codes
Function
<ESC> <SI>
n 1B 0F n Setting slip sensor
<ESC> <FF> n 1B 0C n Slip function
<ESC> <VT> m n 1B 0B m n Set the paper eject direction/length
<EOT> 04 Slip status enquiry
<ESC><EM> mn <LF><NUL> 1B 19 n m 0A 00 Set the wait time until the automatic clamp is activated