Star SP298 SERIES - ESC;POS Mode Commands

24
ENGLISH
ESC/POS Mode Commands
The following table lists the ESC/POS mode commands that are supported by
this printer.
Control Codes
Hexadecimal
Codes
Function
<HT> 09 Horizontal tab
<LF> 0A Line feed
<FF> 0C
Paper eject in single sheet mode.
Paper mode print and return.
<DLE> <EOT> 10 04 Enables real-time status send
<CAN> 18 Cancels print data in page mode
<ESC> SP 1B 20 Sets size of space to right of character
<ESC> ! 1B 21 Enables batch print mode
<ESC># 1B 23 Set memory switch
<ESC> % 1B 25 Enables/disables download character set
<ESC> & 1B26 Defines download character
<ESC> * 1B 2A Selects bit image mode
<ESC> 2 1B 32 Selects 1/6-inch line spacing
<ESC> 3 1B 33 Selects approximate 7/60-inch line spacing
<ESC> = 1B 3D Selects peripheral device
<ESC> @ 1B 40 Initializes the printer
<ESC> C 1B 43 Sets the eject length for single-sheet printing.
<ESC> D 1B 44 Sets horizontal tab position
<ESC> F 1B 46 Enables/disables reverse feed for single-sheet mode
<ESC> J 1B 4A Print and
n /60 inch paper feed
<ESC> K 1B 4B Print and n /60 inch reverse paper feed
<ESC> L 1B 4C Selects page mode
<ESC> R 1B 52 Selects international character set