Power Supply Specifications
Important!
• When using a printer power supply other than the optional AC adaptor (PS48-
24A), be sure that the following cautions are observed.
• Use a power supply of DC 24 V
±
5% and more than 2.0 A.
• Be careful about installing the printer in an area where there is noise. Take the
appropriate measures to protect against electrostatic AC line noise, etc.
• The optional cable set can be connected.
Power Supply
AC Adaptor PS48-24A, switching type
Input 90 to 246V AC, 50/60V
Output 24V DC
±
5%, 2.0A
Plug 3-pin POWER JACK TCP 8927 (Hoshiden brand or equivalent.)
Consumption Current
Conditions: 24V, excluding external equipment driving
Operating
(approximate averages)
Continuous ASCII printing + paper feed: 0.6A
Solid block printing + paper feed: 1.0A
Solid block printing: 1.9A
Peak (solid printing): 3.1A
Stand-by
(approximate averages)
Paper release deactivated: 0.24 A
Paper release activated: 0.07A
To Next Page
Loading...
