BeiJing Starfire Control Technology Co.,Ltd WeChat:18901200180 QQ: 1908817881
17
After selecting the machined parts and setting machining parameters, press the down button on the main
interface. The system interface is as follows:
At this point, press the [Enter] key to start automatic processing. Press the [ESC] key to exit the system and return to
the main interface
At this point, the system starts to work automatically!
During processing, the processing speed can be adjusted at any time according to [F+] [F-]. Point by slow speed,
long by fast speed.
To Next Page
Loading...
Need help?
General
