Hearing Aid Care | 35 34 | Hearing Aid Care
• To ensure the longest life of your rechargeable
hearing aid batteries and the batteries in the
charger:
– Fully charge hearing aid batteries every night.
– Do not expose to excess heat, i.e., do not store
on a window sill or in a hot car.
Standard Tubing
1. Separate the custom
earmold from the
rechargeable BTE by
gently pulling the tubing
away from the earhook.
• Use a soft, damp cloth
or a cleaning brush to
clean debris from the
custom earmold
• Wash the custom
earmold with warm
soapy water
• Never use solvents
2. Slide the custom earmold tubing onto the
rechargeable BTE earhook when completely dry.
Your hearing professional can provide further
information on additional maintenance procedures for
your hearing aid, if needed.
Thin Tubing
1. Unscrew the tubing from
the tip of the hearing aid.
2. Thread the cleaner
through the tubing,
starting at the end just
removed from the hearing
aid, until it extends from the
other end of the tubing.
3. Brush the debris off prior to removing the cleaner.
4. Clean the earbud with a dry cloth or brush.
5. If necessary, the earbud may be washed in
warm, soapy water. Remove the earbud
from the tubing prior to washing. Allow to
dry overnight.
To Next Page
Loading...
