6 | Preparation
Batteries
Your hearing aid uses a battery as its power source�
The battery size can be identified by the orange (13)
color code on the packaging�
To insert or replace the battery:
1� Use the finger pick on the battery door�
2� Open the battery door gently and remove the
old battery�
3� Remove the colored tab from the new battery� For
best results, wait 3–5 minutes after removing
the tab before inserting the battery�
4� Insert into the battery door, “+” side up�
5� Close the battery door�
Battery Indicators
An indicator will sound when the battery voltage
is low� You then have approximately 30 minutes
*
to replace the battery� An indicator may also sound
just before the battery stops working�
* Actual time between low battery indicator and shut down will vary depending on
environmental noise levels and brand of battery used.
To Next Page
Loading...
