Adjustment | 31 30 | Adjustment
To access the native iOS hearing aid controls, triple-
click the Home button (On the iPhone
®
8 or earlier
versions� Please consult Apple
®
support for iPhone X,
XR or XS) on your iOS device� From this screen you
can adjust the volume, select memory or use your
iOS device as a remote microphone�
Select Start Live Listen to stream the iOS device
microphone input directly into your hearing aid� Point
the iOS device microphone toward the audio source�
To minimize background noise and provide the best
signal, place the iOS device as close to the source
as possible�
Right Volume/Left Volume allows you to increase
and decrease volume for each hearing aid individually�
Turn off Adjust Independently to make changes to
both hearing aids simultaneously�
Normal indicates the name of a memory setting in
the hearing aid� You can select from any memories
shown in the list to change the hearing aid to that
memory setting�
Mobile Phone Use
Your hearing aid is designed to work with a
smartphone� When the hearing aid is paired and
powered on, incoming phone calls will route
automatically to your hearing aid� When your hearing
aid is not powered on, incoming calls route only to
your smartphone�
iOS allows you to select a preference for how audio
(call audio and media audio) is routed from your
smartphone to your hearing aids�
Pairing Your Hearing Aid with an
Android Device
To adjust your hearing aid with your Android
™
device,
you must use the Thrive App and pair the two
together so they can communicate� Please follow the
instructions to pair your device and your hearing aid�
1� Locate, then tap the Settings icon on your device�
2� Select Bluetooth�
3� In this screen, if Bluetooth appears Off, change
the settings to On� Then, turn your hearing aids
off and then back on (this puts your hearing aids
into pairing mode)�
To Next Page
