Starline S66 - Drive prohibition function; Engine starting function (only for StarLine S96)

StarLine S96, S66
20
ATTENTION! In the service mode, transition to the other
additional modes is prohibited!
Exit from the service mode is performed by one of the following
methods:
• holding of the tag button for 5 seconds;
• by SMS-command
50;
• by command
50 from the voice menu;
• from the StarLine mobile application;
• from the personal account on the website
starline.online .
«Drive prohibition» function
Use of the «Drive prohibition» function prohibits driving without
additional owner identication.
Additional authorization is performed by entering the code of
owner authorization using the standard car buttons (for instance,
the multimedia control buttons on the steering wheel, window
raiser control buttons) at each security deactivation. The code is
enteredwith the ignition switched-o.
If the owner authorization code is not entered, then if an attempt at
driving is made, the engine will be blocked for 1 minute or until entry
of the owner authorization code.
«Engine starting» function (only for StarLine S96)
The starting function allows for remote and automatic car engine
starting/stopping.
Preparation of a car with manual transmission for remote and
automatic engine starting.
Before engine starting, perform the procedure «program neutral»:
• apply the parking brake with the engine operating. The LED on
the service button will light up;