26
All commands from this number are sent without a GSM-password. To
send commands from other numbers, a password shall be entered in the
beginning of the command text (for instance, send the following SMS-
message for security activation “1234 11”, where 1234 — GSM password,
11 — command number).
The GSM-password is set from the owner’s main number at the rst call.
The control commands are given in the table.
SMS command text Command meaning
10
Deactivate security
О-
11
Security activation
О+
12 Security activation without shock sensor
13 Security activation without an additional sensor
14
Security activation without preliminary level of the shock
sensor
15 Security activation without tilt sensor and motion sensor
19
Activation of the «Panic» mode
PANIC
20
Remote engine stopping
D-
21
Remote engine starting
D+
220 Switch o of the starting pre-start engine heater
221 Switch on of the starting pre-start engine heater
To Next Page
