Starline S66 - Function Engine starting preheater

StarLine S96, S66
24
Function «Engine starting preheater»
The function allows for engine preheating before starting. The starting
preheater can be controlled both in the manual and automatic mode.
Manual mode
In the manual mode the starting preheater is switched on/o by a
command.
The starting preheater can be switched on by one of following methods:
• by SMS-command 221;
• from the StarLine mobile application;
• from the personal account on the website starline.online.
Time of preheater operation in this mode is 20 minutes. It can
be changed in the personal account on the website
starline.online or in the StarLine mobile application.
ATTENTION! If the starting preheater has normal settings,
diering from those set in the personal account, operation
time may dier from the specied one..
Operation can be prolonged by sending a repeated command for
starting preheater switch-on.
The starting preheater can be switched o by one of following methods:
• by SMS-command
220;
• from the StarLine mobile application;
• from the personal account on the website starline.online.
Automatic mode
The automatic mode is activated by the installation specialist
during system setting after mounting.
In the automatic mode the starting preheater is switched on before
operation of engine remote and/or automatic starting. If engine
temperature before remote or automatic starting is less than specied,
the starting preheater will be started. The engine will be started after
engine warm-up to the preset temperature (during automatic starting) or
upon expiry of the preset time.