33
3) Switch ignition o. The LED on the service
button will light up, the number of ashes will
correspond to the ordinal number of the digit
of emergency disarm code (1,2, 3 or 4 times).
4) Switch on the ignition.
5) Repeat items 2-4 for the remaining code digits.
If the emergency disarm code is entered correctly, 3 short siren sounds
and 3 service button LED ashes will follow. The system will set to the
«Security o» mode.
If the code of emergency security deactivation is entered
incorrectly 3 times, the possibility of repeated code entry
will be blocked for 15 minutes and an SMS-notication will
be sent to the owner’s telephone.
An attempt at digit entry will be indicated by 5 LED ashes.
To Next Page
Loading...
