23
• the parking brake is o (for cars with manual transmission);
• the automatic transmission selector was switched over from the
«Parking» position (for cars with automatic transmission);
• the brake pedal is pressed.
Car driving continuation after remote engine starting
To continue driving the car, without stopping the engine after remote
starting, do as follows:
• for cars with ignition lock:
• deactivate system security;
• insert the key into the ignition lock, turn it to position «Ignition
on» and start moving;
• the LED on the valet button will go out at movement start, pressing
of the brake pedal or parking brake release;
• for cars with START/STOP button:
Several options are possible depending on the car and system
connection method:
• rst variant (*):
• deactivate system security;
• hold the brake pedal for 3 seconds;
• the LED on the service button will go out, after which movement
can be started (the START/STOP button need not be pressed);
• second variant (*):
• deactivate system security;
• press the START/STOP button 1 or 2 times (*);
• the LED on the service button will go out, after which movement
can be started.
(*) Ask the installation specialist during mounting about the
connection method of your system and the operation
algorithm.
To Next Page
