Starline S66 - Page 36

StarLine S96, S66
36
The owner authorization code consists of a code sequence,
containing from 5 to 30 pressings of the standard buttons.
The list of standard buttons supported by the car is given on
the website can.starline.ru
If LED ash does not follow while pressing of an original
button, so the button is not supported in the car.
6) In 3 seconds after owner’s code entry, 2 short
service button LED ashes and 2 siren sounds
will follow, conrming code acceptance.
7) Enter the owner authorization code again.
8) If the code is entered correctly, 2 short LED
ashes and 2 siren sounds will follow. If the
code is entry is failed, 4 short LED ashes will
follow, in this case repeat items 7 and 8.
9) In 10 seconds switch ignition O to exit the
registration mode.
10) Exit from the registration mode will be
conrmed by 2 service button LED ashes,
2 siren sounds and then serial signals by
a number of total registered tags and
smartphones.