Starr Instruments FDG Series - Alarm, Memory, and Storage Modes

11
The range is 1~99 seconds. (Fig. 3-8)
3.2.6 Alarm
You can turn on/off the sound of tolerance
alarm( Fig.3-9). The sound for overload alarm cannot
be turned off.
3.3 Memory
In this menu, you can set the memory mode, browse
the data in memory or delete it/them.
3.3.1 Storage Mode
There are two storage mode can be selected, Single
and Series.
Single: The current value displayed can be saved when touch . This mode can be use in all 3
test mode.
Fig. 3-9
Fig. 3-10
Fig. 3-11