2.3 Power on/off
Touch for 2 seconds to power On or Off.
After switching the instrument on, you should check the model wheith it is you want.
Check Battery Icon. If the power is low, should be recharged.
2.4 Testing
After completion of the test preparation, testing can be done.
2.4.1 Measuring heads
Select the appropriate measuring head, install it in the gauge's measurement axis. Tighten it by hand,
without the use of tools. Do not use a deformed or damaged measuring head.
NOTE: Do not use tools to vigorously tighten the measuring head, otherwise it will damage the
force gauge.
2.4.2 Units
The force gauge has a variety of measurement units, select the appropriate unit of force. Under the
measure interface, press the Menu key to enter the menu interface (See 3.2.1 Unit )
To Next Page
Loading...
