Steca TR A301 - Page 33

33
738.955 | 10.40
EN
The settings menu is open.
The Symbols for temperature sensor T1 and tube
collector function flash.
Press the
SET
button for approx. 2 seconds until top
temperature sensor T1 is changed to bottom T1.
To exit the settings menu, press the

button
again until the main menu appears.
8.2.5 Setting the maximum storage tank tem-
perature
DANGER
Risk of scalding due to storage tank temperature
of over 60 °C!
Install a thermostatic mixer in the hot water pipe
and set to maximum 60 °C.
The settings menu is open.
The Symbols for maximum storage tank tempera-
ture
and temperature sensor T2 flash.
Press the
SET
button for approx. 2 seconds until the
temperature indicator flashes.
Change the maximum storage tank temperature
using the

or

buttons.
To save the value, press the
SET
button.
To exit the settings menu, press the

button
again until the main menu appears.
✓
✓



✓
✓




D
T1
T1
T2
D
T1
T1
T2

D
T2
max
D
T2
max
