EasyManua.ls Logo

Steinberg CI1 - Audio Driver Settings of the Software; Sequel LE; WaveLab LE

Steinberg CI1
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CI1 Operation Manual 17
Audio driver settings of the software
English
Audio driver settings of the software
This section explains the audio driver setup with Sequel LE/WaveLab LE.
Sequel LE
1. Start Sequel LE.
2. Click the [Program Setting Page] icon in
the bottom left corner of the screen.
3. Click the right side of “Audio Connec-
tion” in the “Audio Settings” section,
then select “Yamaha Steinberg USB
ASIO (Windows)” or “Steinberg CI1
(Mac).”
4. When “Do you want to switch the ASIO
driver?” window appears, click [Switch].
Setup is now complete.
For instructions on using Sequel LE, refer to the
PDF manual, available from [Help] in the [File]
menu on the upper left corner of the screen.
WaveLab LE
1. Start WaveLab LE.
2. Select [Option] in the WaveLab menu,
then click [Audio Streaming Settings].
3. Select “Yamaha Steinberg USB ASIO
(Windows)” or “Steinberg CI1 (Mac)”
from the list of Audio Devices.
4. Click [OK].
Setup is now complete.
For instructions on using WaveLab LE, refer to
the manual, available from [Help] in the Wave-
Lab menu.
TIP
Setting the audio driver buffer size
Noise produced when using audio applications
such as DAW software may affect audio re-
cording and/or playback. In most cases, you
can solve these problems by adjusting the au-
dio driver buffer size (the size of memory used
to temporarily hold data to avoid intermittent
playback). The buffer size can usually be ad-
justed via the audio driver setup window in the
application. (When using ASIO compatible soft-
ware for Windows, the buffer size can be ad-
justed in the ASIO Buffer Size parameter via
the Control Panel of the Yamaha Steinberg
USB Driver.) While the higher buffer size re-
duces load to the computer CPU but produces
latency (time lag) during recording/playback,
the smaller buffer size may result in noise or
the sound cutting off. Make sure to set the buf-
fer size to an appropriate value depending on
the performance of your computer, the number
of audio/MIDI tracks being recorded/played
back on the DAW software, the number of
plug-in software, and so on.
For more information on this product, please
visit the following Steinberg website:
http://www.steinberg.net/

Other manuals for Steinberg CI1

Related product manuals