10 CI2 Operation Manual
Software Installation
English
Windows Vista / Windows XP
Preparing to install 1
(Windows Vista / Windows XP)
1. Disconnect all the devices other than
the mouse and keyboard from the com-
puter.
2. Start the computer and log on to the Ad-
ministrator account.
Exit any open applications and close all open
windows.
3. Select [Start] ( [Settings] ) [Control
Panel], click “Switch to Classic View” in
the upper left of the window.
After completing the installation, make sure to re-
store the original settings if necessary.
Preparing to install 2
(Windows XP only)
For Windows Vista users, this setting is not nec-
essary. Go on to step 6.
4. Go to [System] [Hardware] [Driver
Signing] [Driver Signing Options], and
select the radio button to the left of “Ig-
nore – Install the software anyway and
don't ask for my approval” and click
[OK].
After completing the installation, make sure to re-
store the original settings if necessary.
5. Close the System Properties window by
clicking the [OK] button or the Close
button ([X]) to close the Control Panel.
Software Installation
(Windows Vista/Windows XP)
6. Insert the TOOLS for CI2 CD-ROM into
the CD-ROM drive.
7. Open the CD-ROM, then double-click
the file “setup.exe.”
A “Welcome to the InstallShield Wizard for
TOOLS for CI2” window appears.
(Windows Vista) If the “User Account Control”
window appears, click [Continue].
8. Click [Next] to start the installation.
To cancel the installation, click [Cancel].
9. When a message appears indicating that
Steinberg CI2 Extension has been in-
stalled, click [Finish].
10. When a window appears requiring you to
restart your computer appears, follow
the on-screen instructions to restart the
computer.
11. Connect the CI2 directly to the computer
(without using a hub) by using the in-
cluded USB cable.
To Next Page
Loading...
