Need help?Do you have a question about the Steinberg CI2 and is the answer not in the manual?
General| Audio Interface Type | USB |
|---|---|
| Number of Mic Preamps | 2 |
| Phantom Power | Yes |
| Sample Rate | 48 kHz |
| Bit Depth | 24-bit |
| MIDI I/O | No |
| Bus Powered | Yes |
| USB | USB 2.0 |
| Software Included | Cubase AI |
| Inputs | 2 x XLR/TRS combo |
| Outputs | 2 x TRS |
Follow basic precautions to avoid serious injury or death from electrical shock, fire, or other hazards.
Follow basic precautions to avoid physical injury or device damage.
Follow precautions for power on/off, inserting objects, placement, and listening volume to prevent damage or hearing loss.
Provides safety and operational guidelines for connecting and disconnecting the USB cable to prevent issues.
Step-by-step guide for installing the Cubase AI software from the DVD-ROM.
Details the buttons, knobs, and indicators on the CI2's front panel for mixer and AI KNOB sections.
Describes the rear panel terminals: USB, FOOT SW, PHONES, LINE OUT, and MIC/LINE-HI-Z jacks.
Details the AI KNOB, LOCK button, and Action Pad button operations for Cubase control.
Explains how to record audio using Cubase's Interactive Recording function and CI2 controls.
Steps to resolve issues where the CI2 device does not turn on or produce sound, focusing on connection.
Addresses sound issues like distortion, checking PEAK indicator, system requirements, and application conflicts.
Guides on resolving issues where Cubase fails to recognize the CI2, checking connections, drivers, and settings.
To Next Page
