CI2 Operation Manual 11
Software Installation
English
Initial settings of driver
(Windows XP only)
For Windows Vista users, the initial settings of
the driver are set automatically. Go on to step
15.
12. The “Found New Hardware Wizard” win-
dow appears.
Some computers may take a while to display
the window.
A dialog box may appear asking you whether
you wish to connect to Windows Update. In this
case, select the radio button to the left of “Not
at this time,” then click [Next].
13. Select the radio button next to “Install
the software automatically” then click
[Next].
If a message “The software you are installing
has not passed Windows Logo Testing” ap-
pears, click [Continue Anyway]. You do not
need to abort the installation.
14. When a message appears indicating that
the installation has been completed,
click [Finish].
Confirming the installation
(Windows Vista / Windows XP)
15. Select [Control Panel] from the Start
menu.
16. Open the Device Manager window as
follows.
(Windows Vista)
Double-click the Device Manager icon.
If the “User Account Control” window appears,
click [Continue].
(Windows XP)
Double-click on the System icon to call up the
System Properties window, then select the
Hardware tab and click [Device Manager].
17. Click on the [+] mark next to “Sound,
video and game controllers,” and con-
firm that “Steinberg CI2” is listed.
The installation is now complete.
To Next Page
Loading...
