Software Installation
Getting Started
13
ENGLISH
■ Windows XP:
Preparing to install
1 Make sure that the power to the MR816 CSX/
MR816 X is turned off.
2 Using an IEEE1394 cable, connect the
MR816 CSX/MR816 X directly to the computer
(without using a hub), and disconnect all other
IEEE1394 devices from the computer.
3 Start the computer and log on to the Administra-
tor account.
4 Select [Start] (➝ [Settings]) ➝ [Control Panel]. If
the control panel appears as shown below, click
“Switch to Classic View” in the upper left of the
window.
All control panels and icons will be displayed.
5 Go to [System] ➝ [Hardware] ➝ [Driver Signing]
➝ [Driver Signing Options], and select the radio
button to the left of “Ignore - Install the software
anyway and don’t ask for my approval” and click
[OK].
NOTE
· After completing the installation, make sure to restore the origi-
nal setting if necessary.
6 Check that no “!” or “x” marks appear next to
“IEEE1394 Bus host controllers” in ([System] ➝
[Hardware] ➝) [Device Manager].
If one of these marks is shown, the IEEE1394/i.LINK
connection cannot be used. Refer to the owner’s
manual of your computer for details.
7 Close the Device Manager window, System Prop-
erties window and Control Panel by clicking the
[OK] button or the Close button ([X]) of the win-
dows.
8 Exit any open applications and close all open
windows.
9 Insert the TOOLS for MR CD-ROM into the CD-
ROM drive.
Software Installation
The installer will install the following three software com-
ponents to your computer.
· Yamaha Steinberg FW Driver
· Steinberg MR Editor
· Steinberg MR Extension
NOTE
· Use the Cancel button or Close button to quit the installation.
Quitting by using the [Ctrl]+[Alt]+[Delete] buttons or by turning
off the power while installation is in process can result in prob-
lems since the installation is terminated without performing a
proper uninstall.
10 Open the CD-ROM, then double-click the file
“setup.exe.”
A “Welcome to the InstallShield Wizard for TOOLS
for MR” window appears.
11 Click [Next].
To Next Page
Loading...
