PRE".'START
INSTRUCTIONS
SPECIFICATIONS FOR FUELS AND OILS
ENGINE OIL
Fill the crankcase with oil that meets API service
designation
SF,
SF/CC, or SF/CD.
Do
not mix
brands or grades
of
oil. Recommended weights for
expected temperatures are:
LINAMAR ENGINES:
32° F (0°
C)
and higher ................. SAE
30
0°
F to 80° F (-18° C
to27°
C)
........ SAE 10W30
or SAE 10W40
-20° F to 50° F (-28° C to 10°
C)
.... SAE 5W--30
KUBOTA DIESEL ENGINES:
77° F (25°
C)
and higher
....
..
....... SAE
30
or SAE10W30
32° F to 77° F (0° C to 25°
C)
...... SAE 20
or SAE10W30
Below 32° F (0°
C)
......
..
............... SAE 1
OW
orSAE10W30
KUBOTA GAS ENGINES
77° F (25°
C)
and higher ....
..
........ SAE
30
or SAE 10W30
32° F to 77° F (0° C to 25°
C)
...... SAE 20
or SAE 10W30
10° F to 32° F (-12° C to
0°
C)
....
SAE 10W
or SAE 10W30
Below 10° F (-12°
C)
..
......
..
..
..
...... SAE 5W30
09-380
3-2
section 3
FUEL
GASOLINE: Use clean, fresh, regular or unleaded
fuel. Use
of
unleaded fuel results
in
less
maintenance.
DIESEL: Use clean, fresh
No.
#2 diesel fuel.
In
extreme cold temperatures
No
.
#1
diesel fuel may
be
used.
Do
not
use
kerosene
or
damage
to
engine
mav
result.
Refer to engine manual for fuel bleeding
instructions.
TRANSAXLE HYDRAULIC OIL
Fill transaxle to the safe range with approved
hydraulic oil. Use only Steiner Trans-Hydraulic Oil or
Te
.xas Refinery Corp. 6440 Universal Torque Fluid.
Do
not use automatic transmission fluid, motor oil, or
any other type
of
hydraulic oil.
•~(•>••
THE USE OF ANY OIL OTHER THAN STEINER
TRANS-HYDRAULIC OIL OR TEXAS REFINERY
CORP.
6440 UNIVERSAL TORQUE FLUID
IS
NOT
RECOMMENDED. IF A SUBSTITUTE OIL CAUSES
OR
SUBSTANTIALLY
CONTRIBUTES
TO
A
FAILURE, THAT FAILURE MAY NOT
BE
COVERED
BY WARRANTY.
£CAUTION
BE
ALERT! STOP RUNNING THE UNIT
AT
THE
FIRST SIGN OF ANY ABNORMAL HYDRAULIC
FUNCTION.
SERIOUS
DAMAGE
TO
THE
HYDRAULIC SYSTEM CAN RESULT!
COOLANT
Fill coolant system with a mixture of one part
Permanent Anti-freeze and one part water.
2/99
To Next Page
Loading...