Stellar 4500 Manual
1-3
CRANE CONTROLS
1. Be familiar with the sequence and
operation of the crane controls.
2. Each individual crane function should have
control function decals. Replace them
immediately if they are missing or illegible.
3. Keep hands, feet and control levers free
from mud, grease and oil.
4. Be familiar with the remote control and
how it operates before attempting to lift a
load.
5. Be prepared before beginning operation of
the crane:
• All protective guards must be in place.
• Be aware of the surroundings: low
branches, power lines, unstable ground.
• Be sure all safety devices provided are in
place and in good operating condition.
• Be prepared for all situations. Keep fire
extinguisher and first aid kit near.
• Be sure all regular maintenance has been
performed.
• Visually inspect all aspects of the crane
for physical damage.
• Check for fluid leaks.
• Make sure the outriggers are down and
stable.
Be familiar with your remote control and how it works before operating
the crane.
Y
our remote may differ from those pictured above.
ATTENTION
Stellar Industries, Inc. is not
liable for accidents incurred by
the crane because of the
operator’s non-fulfillment of
current rules, laws and
regulations
To Next Page
Loading...