040D05A_INSSTZW402+1215
13
TROUBLESHOOTING
PROBLEM CODE DEFINITION
LO Temperature is below 0°C (32°F), heating will be always active
HI Temperature is above 50°C (122°F), heating will be always inactive
--
Temperature sensor is defective, heating will always be inactive.
Call tech support.
Err
The connection could not be established with the Z-wave network.
Make sure the thermostat is within range of the Z-Wave controller
or a Z-Wave repeater and make sure the Z-Wave controller is in
Inclusion or Exclusion mode.
E1
Secondary temperature sensor is defective. The thermostat will
still control the temperature but performance may be degraded.
Consider replacing the thermostat.
To Next Page
Loading...
