STEPCRAFT MM-800 - 1 Signs and Symbols; 2 Product Information; Manufacturer´s Data; Machine Identification

-3-
1 Signs and symbols
This symbol appears at places where you will find instructions for your
own safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get
damaged.
This symbol indicates tips for the user and other useful information.
2 Product information
98/37/EG 89/336/EWG EN 60745, EN 55014-1, EN 55014-2, EN
61000-3, EN 12100 T1, EN 12100 T2, EN
1037, EN 847-1
DD40G / DD40P
Art.-Nr. 916001, 916002, 916010, 916020,
916021,916025, 916030, 916031,916034,
916040, 916041,916045
2.1 Manufacturer´s data
STEPCRAFT GmbH & Co KG, An der Beile 2, 58708 Menden, Germany, Phone +49 (0)2373 / 179 11 60, Fax
+49 (0)2373 / 179 11 59.
2.2 Machine identification
All details required for machine identification are available on the attached rating plate.
Protection class II
CE symbol to document compliance with the basic safety and health
requirements according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electric tools together with household waste material!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical
tools must be collected separately and recycled in an environmentally-
compatible manner.
To reduce the risk of injury, please read the operating instructions.