6 — Routine Maintenance
74
Operator Manual
AMSCO® 2532
10041925_M
.
8. Reinstall debris screen in sump.
IMPORTANT: Slightly push on debris screen to ensure debris screen correctly rests on sump surface. No gap should be
noted between the debris screen gasket and the sump surface.
9. Roll manifold rack back into chamber.
10. Close chamber load door and turn door handle.
.
6.5 Cleaning Water Outlet Connection
WARNING
SLIPPING HAZARD
To prevent slips, keep floors dry. Promptly clean up any spills or drippage. For spills or
drippage of detergents or other chemicals, follow safety precautions and handling
procedures set forth on detergent or chemical label and/or Safety Data Sheet (SDS).