Steris LED202 - Poor Light Intensity or Beam Pattern; Lights on Dual Wall Control Reversed; Wall Control Does Not Function

9 — Troubleshooting
21
11042437_A
LED202 In-Ceiling Lighting System Operator Manual
9.5 Poor Light Intensity or Beam Pattern
Condition
Poor light intensity or beam pattern.
General Troubleshooting
Additional Information
Internal components require inspection.
1. Contact STERIS.
9.6 Lights on Dual Wall Control Reversed
Condition
The lights on the dual wall control are reversed, i.e. controls for “Light 1” control “Light 2”.
General Troubleshooting
Additional Information
Internal components require inspection.
1. Contact STERIS.
9.7 Wall Control Does Not Function
Condition
Wall control does not respond to Customer input.
General Troubleshooting Additional Information
Internal components require inspection.
1. Contact STERIS.