104
17.3 Hot water output
The DHW output is subject to the mains voltage, the appliance's
connected load and the cold water inlet temperature. The rated
voltage and rated output can be found on the type plate.
Rated voltage Cold water inlet temperature
380 V 400 V 415 V
16.2 7.0 8.3 10.1 12.9
19 8.2 9.7 11.8 15.1
21.7 9.4 11.1 13.5 17.2
18 7.8 9.2 11.2 14.3
21 9.1 10.7 13.0 16.7
24 10.4 12.2 14.9 19.0
19.4 8.4 9.9 12.0 15.4
22.6 9.8 11.5 14.0 17.9
25.8 11.2 13.2 16.0 20.5
24.4 10.6 12.4 15.2 19.4
27 11.7 13.8 16.8 21.4
29.1 12.6 14.8 18.1 23.1
Rated voltage Cold water inlet temperature
380 V 400 V 415 V
16.2 5.1 5.8 6.6 7.7
19 6.0 6.8 7.8 9.0
21.7 6.9 7.8 8.9 10.3
18 5.7 6.4 7.3 8.6
21 6.7 7.5 8.6 10.0
24 7.6 8.6 9.8 11.4
19.4 6.2 6.9 7.9 9.2
22.6 7.2 8.1 9.2 10.8
25.8 8.2 9.2 10.5 12.3
24.4 7.7 8.7 10.0 11.6
27 8.6 9.6 11.0 12.9
29.1 9.2 10.4 11.9 13.9
17.4 Application areas/ Conversion table
Specific electrical resistance and specific electrical conductivity.
Resist-
ance
ρ≥
Conductivity σ≤
Resist-
ance
ρ≥
Conductivity σ≤
Resist-
ance
ρ≥
Conductivity σ≤
Ωcm mS/m μS/cm Ωcm mS/m μS/cm Ωcm mS/m μS/cm
900 111 1111 800 125 1250 735 136 1361
To Next Page
Loading...
