STIEBEL ELTRON DHE Connect 18 - Page 101

ENGLISH
  101


 
 Service code Entering the Service code brings up the "Control menu" and "Network diagnostics" menu items.
► Enter service code "1000".
► Enable the Service code with the tick symbol ("Service level 1" appears on the display). Continue using
the arrow symbol.
► "Service level 1" is disabled by pressing "Disable level 1"
 Control menu You can call up appliance information here.
 Network diagnostics For DHEConnect only: You can obtain network information here.
Connection overview/ Component overview
D0000053288
1
2
3
4
5
6
7
8
9
10
1 Motorised valve
2 Flow sensor
3 High limit safety cut-out, automatic reset
4 NTC sensor
5 Wireless module
6 Display
7 Programming unit
8 Connected load button
9 Diagnostic traffic light
10 "Service" button to enable "Anti-scalding protection
activation"
Wireless module connecting cable plug positions
D0000056236
Programming unit connecting cable plug positions
T-Soll
D0000056909
1
1 "T-Soll"