EasyManua.ls Logo

STIEBEL ELTRON SOM 8 PLUS - Page 57

STIEBEL ELTRON SOM 8 PLUS
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
In addition to the pre-dened optional functions,
function blocks consisting of thermostat functions,
timer and dierential functions are available. With
the help of these function blocks, further compo-
nents, resp. functions can be controlled.
To each function block, sensors and free relays can
be allocated. Sensors already in use can be allocated
again without impeding their control functions.
Within a function block the functions are intercon-
nected (AND gate). This means that the conditions
of all the activated functions have to be fullled (e.
g. thermostat and timer) for switching the allocated
relay. As soon as one condition is not fullled, the re-
lay is switched o.
Function block
Function Function block 1
Relay 3
Thermostat
thermostat a- S3
thermostat b- S4
Differential function T T
Sen. 1
Sen. 2
Timer Timer
Tha-S3
Thb-S4
T-S3>S4
Timer
R3
Thermostat function
The relay allocated to the function block is switched
on, when the adjusted switch-on temperature (Th(x)
on) is reached. It is switched o when the adjusted
switch-o temperature (Th(x)o) is reached. The
switching conditions of all other activated functions
of the function block have to be fullled as well.
Allocate the reference sensor in the Sensor channel.
Adjust the maximum temperature limitation with
Th(x)o> Th(x)on and the minimum temperature
limitation with Th(x)on> Th(x)o. The temperatures
cannot be set to an identical value.
T function
The relay allocated to the function block is switched
on as soon as the adjusted switch-on temperature
dierence (
ΔTh(x)on) is reached. It is switched o
as soon as the adjusted switch-o temperature dif-
ference (ΔTh(x)o) is reached. The switching condi-
tions of all other activated functions of the function
block have to be fullled as well.
The
ΔT function is equipped with a speed control
function. A set temperature dierence and a mini-
mum speed can be adjusted. The non-adjustable rise
value is set to 2 K.
295931-36390-8667 SOM 8 plus_en.indb 57 20.10.2011 13:14:48

Related product manuals