69
12 Basic settings
In the Basic settings menu, all basic parameters for
the controller can be adjusted. Normally, these set-
tings have been made during commissioning. They
can be subsequently changed in this menu.
Adjustment channel Description Adjustment range / selection Factory setting
Language Selection of the menu language Deutsch, English, Francais Deutsch
Auto DST Daylight savings time selection Yes, No Yes
Date Adjustment of the current date 01.01.2001 ... 31.12.2099 01.01.2010
Time Adjustment of the current time 00:00 ... 23:59 -
Temp. Unit Temperature unit °C, °F °C
Vol. unit Unit of volume Gallons, Litre Litre
Press. unit Unit of pressure psi, bar bar
Energy unit Energy unit Wh, BTU Wh
Factory setting back to factory settings Yes, No No
Basic settings
The controller is equipped with an SD card slot for
SD memory cards.
The following functions can be carried out with an
SD card:
• Logging measurement and balance values. The
values can be opened and visualised on a compu-
ter, e. g. in a spreadsheet programme.
• Transferring adjustments and parameterisations
prepared on the computer onto the controller.
• Storing adjustments and parameterisations onto
the SD card and restoring them if necessary.
13 SD card
295931-36390-8667 SOM 8 plus_en.indb 69 20.10.2011 13:14:56
To Next Page
Loading...