Release 00 - 03/2018
Engine TRE 0701-TRE 0702-TRE 0801
pag. 11
3. TECHNICAL DATA AND SPECIFICATIONS
3.7. Table of Tightening torques
Chapter Ref. Descriptionofscrew Tightening torques
6 - 10 Attachment bolt ywheel 110 - 120 Nm
6 - 9 Coil xing screws 8 - 12 Nm
6 Fixing screw starting motor 22 - 30 Nm
6 Starting motor screw 8 - 12 Nm
7 Fixing nuts carburettor and lter 8 - 12 Nm
8 Support screws petrol pump 8 - 12 Nm
8 Support return air screw 8 - 12 Nm
8 Support screws 8 - 12 Nm
9 - 10 Spark plug tightening torque 18 - 22 Nm
10 Screws valve cover 8 - 12 Nm
10 Fixing head screws 50 - 55 Nm
10 Screws small plate drop wire 8 - 12 Nm
10 Fixing screws generator 8 - 12 Nm
11 Screws cover oil pump 8 - 12 Nm
11 Union screws under carter and sump 24 - 27 Nm
11 Fixing screws lower connecting rod cap 16 - 18 Nm
P.S.Forthecouplingtourqueofallstandardscrewsrefertothesingletable.
To Next Page
Loading...
