EN - 19
Your Stiga dealer can provide service and
adjustments to keep your unit operating at
peak efficiency.
Contact an authorized engine manufacturer’s
service center for engine service.
MAINTENANCE SCHEDULE
SERVICE PARTS
See your Stiga dealer to purchase service
parts for your unit.
SERVICE POSITION
See Figure 18.
Before starting any of the following
maintenance procedures:
1. Park unit a flat, level surface.
2. Stop engine, remove key and wait for all
moving parts to stop and for hot parts to
cool.
3. Move steering levers to neutral position
and rotate handles outward.
4. Engage parking brake.
5. Disconnect spark plug wires from engine.
6. Tip seat forward.
IMPORTANT: Reconnect spark plug wires
after maintenance.
CHECK SAFETY INTERLOCK
SYSTEM
Check function of the Safety Interlock System
by performing the tests below. Contact your
Stiga dealer for repair if any of the tests fail.
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.
Service Performed
Each Use
Every 25 hrs.
Every 50 hrs.
Every 100 hrs.
Every 400 hrs.
Check Safety Interlock
System
•
Check Parking Brake •
Check Engine Oil * •
Change Engine Oil *+
Check Tyre Pressure •
Check Mower Blades •
Check Battery •
Clean Battery •
Check Air Filter * •
Check Fasteners •
Lubricate Unit •
Clean Engine Cooling
System*
•
Check Belts •
* Refer to engine manual for instructions
+ Use tubing included in literature pack to
drain engine oil.
To Next Page
Loading...
Need help?
General
