Page 4 Technical Information 11.2013
TI_11_2013_30_01_01.fm
3.2 Cleaning the Air Filter
. Wash the filter in STIHL special cleaner (special
accessory) or clean, non-flammable solution
(e.g. warm soapy water) – rinse the filter from
the inside outwards under a jet of water – do not
use a pressure washer.
Dry all parts of the filter – do not use extreme heat.
3.3 Installing the Air Filter
. Place the air filter in position.
. Push the air filter in the direction of the filter
housing and turn it clockwise at the same time
until it engages – the filter is correctly installed
when the name "STIHL" is horizontal.
. Fit the shroud.
4. Chain Sprocket Cover with
Captive Nuts
Nuts are permanently connected to the chain
sprocket cover and cannot be lost. The nuts are
always correctly positioned when fitting the sprocket
cover. Each nut can be tightened down independent
of the other.
The nuts can be removed and installed with the aid
of collar nut tools 5910 893 9600 or
stud 5910 893 9601 (special servicing tools).
To Next Page
Loading...
Need help?
General
