Need help?Do you have a question about the Stihl 1140 Series and is the answer not in the manual?
Explains how to start and stop the engine using the Master Control Lever, including its positions.
Details the various positions of the Master Control Lever for starting, running, and stopping the engine.
Step-by-step guide on how to remove the HD2 air filter from the chain saw for cleaning or replacement.
Procedure for cleaning the HD2 air filter using special cleaner or soapy water, and drying instructions.
Instructions on how to correctly install the HD2 air filter into the filter housing and fit the shroud.
Technical specifications for the STIHL MS 362 C-M engine, including displacement, power, and torque.
Details on the ignition system, including the type of spark plug and the specified electrode gap.
Information about the fuel system, including the type of carburetor and fuel tank capacity.
Details on the chain lubrication system, including oil pump type and oil tank capacity.
Weight specifications for different versions of the STIHL MS 362 C-M chain saw (dry, without bar and chain).
Specifications for guide bars and saw chains, including types, pitch, and drive link gauge.
Guidance on using the STIHL MDG 1 analyzer and other resources for diagnosing and tracing problems.
Procedures for removing and installing the control unit, including necessary tools and adjustments.
Detailed steps for removing and installing the wiring harness, including component connections.
Procedures for removing and installing the switch unit, including associated components and connections.
To Next Page
General
