Stihl BR 500 - Muffler;Spark; Arresting Screen

34 BR 500, BR 550, BR 600
: Loosen the screws (1).
: Remove the scoop (2) to the left.
452RA018
1
VA
2
: If a spark arresting screen (1) is
fitted, carefully pry it out and
clean or replace it as necessary.
452RA023
VA
1
: Take out the screws (arrows)
: Remove the muffler (1).
452RA019
1
VA
: Remove the gasket (1).
– Clean the sealing faces.
Install in the reverse sequence.
Always install a new muffler gasket.
452RA020
VA
1
: Carefully fit the spark arresting
screen (1) in position.
Guide lug on spark arresting screen
must engage the scoop.
452RA021
VA
1
: Push the scoop (1) into place.
: Tighten down the screws (2)
firmly.
Install all other parts in the reverse
sequence.
452RA022
VA
1
2
2
7.6 Muffler/Spark Arresting
Screen
RA_452_00_01_02.book Seite 34 Donnerstag, 16. Februar 2012 11:52 11