To Next PageTo Next Page
Need help?Do you have a question about the Stihl FC 95 and is the answer not in the manual?
General| Displacement | 28.4 cm³ |
|---|---|
| Power Output | 0.8 kW |
| Handle Type | Loop Handle |
| Sound Power Level | 106 dB(A) |
| Engine Type | 2-stroke |
| Overall Length | 1.8 m |
Details physical and mental health requirements for operating the edger.
Provides detailed instructions and warnings for safely refueling the power tool.
Explains how to firmly hold and control the unit with both hands during operation.
Warns against using unauthorized metal blades and covers muffler safety.
Emphasizes using genuine parts and following instructions for maintenance and repair.
Provides instructions and safety precautions for adjusting the cutting depth wheel.
Details the technique for edging, including starting the engine and guiding the tool.
Explains how to adjust the throttle cable for correct operation.
Details the steps for properly mounting the cutting blade onto the edger.
Specifies the type of unleaded gasoline and oil mixture required for the engine.
Details preparations before fueling, including cleaning the cap and shaking the mixture.
Describes how to safely fuel the machine, including cap types and warnings.
Details the steps for starting the engine, including choke and throttle operation.
Explains the cranking process and how to stop the engine safely.
Covers operating procedures during normal use and after long periods of operation.
Explains how to clean or replace the air filter element when performance is lost.
Details how to adjust the idle speed screw to ensure the cutting blade does not rotate at idle.
Covers cleaning, checking the electrode gap, and rectifying fouling issues.
Provides a schedule for routine maintenance tasks and their intervals.
