Need help?Do you have a question about the Stihl FC 83 and is the answer not in the manual?
Explains symbols and text markings for procedures.
Notes non-standard components and product development.
Requirements for operators and keeping others safe.
Details risks from cutting tool, thrown objects, and prevention.
Warns about vibration diseases and pacemaker interference.
Recommends clothing, gloves, glasses, and hearing protection.
Advises hearing protection, proper clothing, and footing.
Safe edger operation, modifications, and transport.
Adjusting harness, balance, and inspecting the unit.
Mixing fuel, safe refueling, and pressure release.
Step-by-step guide for starting the engine safely.
Working in ventilated areas, awareness of exhaust fumes.
Two-handed grip, avoiding slippery ground, and clearing obstacles.
Proper blade contact, integrity checks, and avoiding damage.
Blade security, idle speed, and component integrity.
User maintenance, genuine parts, and proper storage.
Checking muffler, spark plug, and storing the machine.
Steps to set the cutting depth for desired results.
Proper method for edging, including throttle and blade angle.
Attaching and adjusting the loop handle for comfort.
Detailed steps for correctly installing the cutting blade.
Specifies correct fuel mix, oil, and gasoline octane.
Mixing fuel, safe refueling, and pressure release.
Identifies and describes the main controls of the edger.
Step-by-step guide for starting, stopping, and using controls.
Guidelines for operating a new machine during its initial use.
Procedure for cleaning the air filter to maintain engine performance.
Information on factory settings and tuning the carburetor.
How to adjust the idle speed for smooth engine operation.
Procedure for inspecting and diagnosing issues using the spark plug.
Instructions for lubricating the gearbox with grease.
Tips for prolonging the life of the starter rope.
Proper procedures for storing the edger for extended periods.
Guidance on replacing worn depth or gearbox wheels.
Steps for removing and fitting the skirt for protection.
Instructions on when and how to replace the cutting blade.
Identifies and illustrates the various parts and controls.
Explains the function of each numbered part and control.
Technical details of the engine, fuel system, and weight.
Lists available optional accessories with part numbers.
Guidelines for user maintenance vs. professional repair.
Information on STIHL's ISO 9001 quality management certification.
Details user responsibilities and warranty coverage scope.
Explains warranty duration, how to make claims, and covered parts.
To Next Page
General
